Factory direct sales SGLL6-80/1.0, SGLL4-12L/1.0, SGLL4-16L

Cooler performance:

 

1. Wide heat transfer area: The heat transfer tube of this cooler adopts the copper tube thread design, and its contact area is wide, so the heat transfer effect is higher than that of the general smooth heat transfer tube.

 

2. Good heat transfer: This series of copper pipes is directly sintered with copper pipes to integrate the heat transfer pipes, so the heat transfer is good and reliable, and there is no welding spot falling off to cause poor heat transfer.

 

3. It can be suitable for large flow: the number of heat transfer tubes is reduced, the smooth area of ​​the oil used is increased, and the loss of pressure can be prevented. It is equipped with a baffle to guide the flow direction, which can generate a curved flow direction, increase the flow and play a role.

 

4. Good heat transfer tube: 99.9% pure copper with good thermal conductivity is used as the most suitable cooling tube for heat dissipation.

 

5. No oil leakage: Due to the integrated design of the plate tube and the body, it can avoid the trouble of mixing water and oil, and at the same time, it is indeed tight after the air tightness test before leaving the factory, so it can achieve the purpose of preventing leakage.

 

6. Easy to assemble: the feet can rotate freely 360 degrees. For the assembly of the body, the direction and angle can be changed at will, and the feet can be directly welded to any position of the main machine or the oil tank, which is convenient and simple.

 

7. The spiral deflector guides the oil to flow uniformly and continuously in a spiral shape, which overcomes the dead angle of heat exchange caused by the traditional baffle, with high heat exchange efficiency and small pressure loss.

 

8. The water flow has two processes and four processes, and the flow has large flow (large lead of the deflector) and small flow (small lead of the deflector). There are various varieties and can meet various requirements.